Connecting to Multiple Cameras
|Top Previous Next|
Single copy of DSLR Remote Pro Multi-Camera controlling multiple cameras on a single PC
Individual cameras can be selected using the "Camera:" drop down list which can be found below the release and Preview buttons in the main window. If the "Gang camera settings together" option is selected in preferences changes to the camera settings made via the controls in the main window (e.g. shutter speed, aperture, ISO, white balance) will be applied to all connected cameras.
If the "Auto Reconnect" option is selected in the "Camera" menu DSLR Remote Pro will automatically connect to new cameras as they are detected or disconnect from a camera if it goes offline (e.g. it is turned off or the USB cable is unplugged).
Single copy of DSLR Remote Pro Multi-Camera controlling multiple cameras on multiple PCs
Multiple copies of DSLR Remote Pro Multi-Camera each controlling a single camera
DSLR Remote Pro Multi-Camera can also run in a special "single camera per instance" mode where each copy of the software only controls one camera. Multiple cameras can be controlled by running multiple copies of DSLR Remote Pro Multi-Camera on the same PC. This has the advantage that each copy of DSLR Remote Pro Multi-Camera only connects to one camera and the other cameras are not affected if that camera goes offline for any reason (e.g. it is turned off, the battery runs out or the USB cable is disconnected). You can also use the "Auto Reconnect" option in the "Camera" menu so that DSLR Remote Pro Multi-Camera automatically reconnects to the camera when it comes back online. The main disadvantages of using this mode are that it is slightly more difficult to setup and it requires a more powerful PC than using a single copy of DSLR Remote Pro Multi-Camera to control multiple cameras.
An AutoHotKey script called DslrRemoteProMultiCamera.ahk is provided to help with running multiple copies of DSLR Remote Pro Multi-Camera. Before using it please install AutoHotKey (this is a free download from www.autohotkey.org). Then connect all the cameras, turn them on and wait for Windows to detect them all. Then double click on the DslrRemoteProMultiCamera.ahk script to run it. This will run a utility called ConnectedCameraList.exe which displays a list of the connected cameras and the USB ports they are connected to. The script reads this list and then launches a copy of DSLR Remote Pro Multi-Camera for each camera. The script then arranges the DSLR Remote Pro Multi-Camera windows on the screen and displays a small summary window at the top of the screen. Closing the summary window will also close all the DSLR Remote Pro Multi-Camera windows.
Please note: The DslrRemoteProMultiCamera.ahk script is provided "as is" for your convenience and we do not offer support in debugging or modifying it. You are free to modify it to suit your needs or we can do this for you at our normal consultancy rate.
The settings on the cameras can be changed using a single copy of DSLR Remote Pro Multi-Camera by using the "Synchronize multiple copies of DSLR Remote Pro Multi-Camera" option. The shared folder doesn't need to be a folder shared on the network if only one PC is being used to control the cameras.
Multiple copies of DSLR Remote Pro Multi-Camera each controlling a single camera on multiple PCs
This is similar to the "Multiple copies of DSLR Remote Pro Multi-Camera each controlling a single camera" configuration described above but uses a shared folder to synchronize the camera settings. When the camera settings are changed using the controls in the main DSLR Remote Pro Multi-Camera window the settings are saved to a file named status.xml in the shared folder. Copies of DSLR Remote Pro Multi-Camera running on this computer and other computers on the network will monitor the status.xml file and apply the changes to the cameras connected to that PC. This allows the settings for all cameras to be adjusted using any PC on the network.