Keyboard Shortcuts

The photobooth mode in NKRemote can accept the following key presses:

F2 - switch to B&W mode and start the photobooth sequence

F3 - switch to color mode and start the photobooth sequence

F4 - start the photobooth sequence using the current B&W or color setting

F5 - same as F4

F6 - reactivate live view and display ready.jpg screen if previously canceled or cancel live view and display welcome.jpg screen if live view currently active

Ctrl+F1 - select "Standard" camera Picture Control

Ctrl+F2 - select "Neutral" camera Picture Control

Ctrl+F3 - select "Vivid" camera Picture Control

Ctrl+F4 - select "Monochrome" camera Picture Control

Ctrl+F5 - select "Portrait" camera Picture Control

Ctrl+F6 - select "Landscape" camera Picture Control

Ctrl+A - activate contrast detect AF (only available when live view is enabled)

Ctrl+B - switch to B&W mode but don't start the photobooth sequence

Ctrl+C - switch to color mode but don't start the photobooth sequence

Ctrl+K - switch to color mode but don't start the photobooth sequence (alternative for Ctrl+C)

Ctrl+R - reprint the last set of photos

Ctrl+T - switch to B&W (toned) mode but don't start the photobooth sequence

Ctrl+W - toggle between B&W and color modes

A - Accept print when print confirmation window is displayed

W - cycle through color, B&W and B&W (toned) modes

X - Reject print when print confirmation window is displayed

Ctrl+1 - select one copy of prints

Ctrl+2 - select two copies of prints

Ctrl+3 - select three copies of prints

Ctrl+4 - select four copies of prints

Ctrl+5 - select five copies of prints

Ctrl+6 - select six copies of prints

Ctrl+7 - select seven copies of prints

Ctrl+8 - select eight copies of prints

Ctrl+9 - select nine copies of prints

Shift+Ctrl+1 - select profile 1

Shift+Ctrl+2 - select profile 2

Shift+Ctrl+3 - select profile 3

Shift+Ctrl+4 - select profile 4

Shift+Ctrl+5 - select profile 5

Shift+Ctrl+6 - select profile 6

Number pad '+' - increase the number copies of prints (up to a maximum of 9 copies)

Number pad '-' - decrease the number copies of prints (down to a minimum of 1 copy)

b - cycle through number of copies of prints: 1,2,3,4,5,6,7,8,9,1,2,3...